6 User settings
With the
hygiene recommendation display
It is common nowadays to select programmes with temperatures below 60° C in order
to save energy. These achieve perfectly good results with lightly soiled everyday wash-
ing. However, washing almost exclusively with low temperatures will result in the forma-
tion of foul smelling coatings in the appliance. To prevent this a «hygiene recommenda-
tion» appears when it is recommended that one of the following steps be taken for hy-
giene reasons:
▸ With one of the next wash cycles carry out a wash with at least 60°C.
or:
▸ Unload the washing.
▸ Press the button 1×.
–
The «Appliance hygiene» programme starts.
5.9
At the end of the wash day
▸ Clean the detergent compartments.
▸ Pull the detergent dispenser drawer out as far as it will go in
order for it to dry.
▸ Remove any deposits or foreign objects from out of the door
seal.
▸ Leave the appliance door slightly ajar to allow the washing
drum and door seal to dry.
6
User settings
6.1
Adjusting user settings
Providing no programme is running and no error message is displayed, the user settings
can be changed with the appliance door open or closed. The procedure is generally the
same for all settings.
Changing user settings
▸ Hold the
button depressed for 5 seconds.
–
appears in the digital display.
▸ Touch the
button repeatedly until the required setting appears in the digital display,
e.g.:
for childproof lock OFF.
▸ To change, touch the
button.
–
appears in the digital display for childproof lock ON.
–
The setting is taken over automatically and must not be confirmed.
Exiting user settings
▸ Touch the
button repeatedly until the digital display goes out.
If no other button is touched within the next 15 seconds, user settings is exited
and the plain text display goes out.
22
