10
V-TUF STEAM OPERATION WITH HOT BOX
With the aid of the V-TUF Super-heated steam performance kit. You can customise your
“hotbox” for many demanding & specialised cleaning processes, including historical restoration
& renovation projects.
SUPER HEATED STEAM PERFORMANCE KIT:
Set up the
PRESSURE GAUGE 0 to 300BAR CALIBRATING KIT MSQ - C6.030KIT
below on the cold side of the HOT BOX. Remove the gauge kit once calibration.
To select the ultimate pressure suited to the surface you are cleaning, and make sure
that you have the correct nozzle size (see below) to suit that pressure.
Nozzle size: 09 - Pressure: 30 BAR
Nozzle size: 08 - Pressure: 40 BAR
Nozzle size: 07 – Pressure: 50 BAR
Nozzle size: 065 – Pressure: 60 BAR
Nozzle size: 06 – Pressure: 70 BAR
Nozzle size: 05 – Pressure: 100 BAR
Nozzle size: 04 - Pressure: 145 BAR
Remember: Please select the best jet spray angle too (0 degree; 15 degrees; 25 degrees; 40
degrees).
0 degree jets:
https://www.v-tuf.co.uk/spares-accessories/triggers-lances-nozzles/nozzles
holders/fan-nozzles/00-pencil-jet-nozzle
15 degree jets:
https://www.v-tuf.co.uk/spares-accessories/triggers-lances-nozzles/nozzles
holders/fan-nozzles/150-fan-nozzle
25 degree jets:
https://www.v-tuf.co.uk/spares-accessories/triggers-lances-nozzles/nozzles
holders/fan-nozzles/250-fan-nozzle
40 degree jets:
https://www.v-tuf.co.uk/spares-accessories/triggers-lances-nozzles/nozzles
holders/fan-nozzles/400-fan-nozzle
These nozzles are calibrated with the standard hot box fuel injector size of 1.35 80H
