background image

5.2 Solar Power Curve

- 28 -

0W

Stand by

0.0Hz

Energy

CT2:   0W      LD2

0W

CT1

: 

0W      LD1

0W

BUY

Today=0.0KWH
Total  =8.60 KWH

Today=2.2KWH
Total  =11.60 KWH

SELL

CT3:   0W      LD3

0W

L1: 0V      L2: 0V      L3: 0V

Grid

Power: 1560W

Energy

PV1-V: 286V PV2-V: 45V

Today=8.0 KWH
Total  =12.00 KWH

PV1-I: 5.5A

PV2-I: 0.0A

PV1-P: 1559W PV2-P: 1W

Solar

This is Solar Panel detail page.

Press the “Energy “bu�on will enter into the power 

curve page.

Solar Panel Genera�on.

Voltage, Current, Power for each MPPT.
Solar Panel energy for Day and Total.

Power:   55W

1166w

221v          0w

229v       1166w

225v          0w

SOC:99%

   -21w

BAT_V:53.65V  

DC_P1:   0W

DC_V1:   0V

DC_I1:   0.0A  

DC_P2:   0W

DC_V2:   0V

DC_I2:   0.0A  

BAT_I: -0.41A  
BAT_T: 27.0C  

1244w

50Hz

Load

Battery

PV1

PV2

Grid

Inverter

Today=0.5 KWH

Total =1.60 KWH

L1:   220V        P1: 19W

L2:   220V        P2: 18W

L3:   220V        P3: 18W

Load

Energy

This is Back-up Load detail page.

Press the “Energy “ bu�on will enter into the power 

curve page.

Back-up Power.

Voltage, Power for each Phase.
Back-up consump�on for Day and Total.

This is Grid detail page.

Press the “Energy “ bu�on will enter into the power 

curve page.

Status, Power, Frequency.

BUY: Energy from Grid to Inverter,

L: Voltage for each Phase

CT: Power detected by the external current 

       sensors

LD: Power detected using internal sensors on 

      AC grid in/out breaker

SELL: Energy from Inverter to grid.


This is Inverter detail page.

Inverter Genera�on.

Voltage, Current, Power for each Phase.
 AC-T: mean Heat-sink temperature.

222v          0.8w

229v          5.0w

229v          0.9w

HM:            LD:

-10W          28W

5W          1192W

0W          24W

 -81w

50Hz

222v          0.1A

230v          0.1A

223v          0.1A

INV_P:

-30W          

-26W         AC_T:

-25W         38.8C

Содержание SUN-5K-SG04LP3-EU




















































Отзывы: