V-Sun TLT-2F Скачать руководство пользователя страница 23

Страница: 23 / 34

TLT-2F GPS/GSM Car Tracker Instruction Manual V3.0

23/34

domain of [0, 999]. When X=0, Overspeed warning function is turned off.

2. After the function is activated, when travel speed exceeds set speed, the device will send position

information with information format returned from “request for sin

gle positioning" to the three prestored numbers

immediately. Information status is STATE: OVERSPEED. It will also call the first prestored number immediately.

If it fails (the phone is turned off or cannot be connected), the second and the third phone number will be called in

sequence. Then, if travel speed is less than set speed, the device will send position information with information

format returned from “request for single positioning" to the three prestored numbers immediately. Information

status is STATE: SAFE SPEED. It will also call the first prestored number immediately. If it fails (the phone is

turned off or cannot be connected), the second and the third phone number will be called in sequence.

17. Mileage statistics function

17.1 Instruction to turn off mileage statistics

Instruction format: 140+user password

For example: 1400000

Description: After receiving the instruction, TLT-2F will return confirmation message: SET MILEAGE

STATISTICS OFF OK. Mileage statistics function will remain in turnoff status.

17.2 Instruction to turn on mileage statistics

The instruction can be used to set the interval of timing report on total mileage.

Instruction format: 141+PW

Description: After receiving the instruction, TLT-2F will return confirmation message: SET MILEAGE

STATISTICS ON OK. Mileage statistics function will be turn on.

17.3 Instruction to set initial mileage value (zero clearing)

Instruction format: 142+PW

Description: After receiving the instruction, TLT-2F will return confirmation message: MILEAGE

STATISTICS RESET OK.

17.4 Instruction to read current mileage

Instruction format: 143 + user password.

For example: 1430000

Description: After receiving the instruction and confirming that user password is correct, the device will read

current total mileage value and return the following message to the number which sends the instruction: MILEAGE

STATISTICS:ON

CURRENT TOTAL MILEAGE:XX (XX means current mileage value with unit of M).

Содержание TLT-2F



































Результаты поиска

Содержание TLT-2F

Отзывы:

Похожие инструкции для TLT-2F

Бренды по названию

Популярные бренды

V-Sun TLT-2F, Инструкция по эксплуатации

Результаты поиска

Содержание TLT-2F

Отзывы:

Похожие инструкции для TLT-2F

Бренды по названию

Популярные бренды