Version 04.05.2017
VL3-MBN51
P
a
g
e
12
2.5.3. After-market rear-view camera
Some vehicles have a different reverse gear code on the CAN-bus which the video-interface
is not compatible with. Therefore, there are two different ways of installation. If the video
interface receives a signal of the reverse gear, the green wire “Reverse-OUT” of the 20pin
cable should carry +12V while the reverse gear is engaged.
Note:
Do not forget to set dip5 of the video-interface to ON before testing.
2.5.3.1.
Case 1: CAN-box detects reverse gear
If the CAN-bus interface de12V on the green wire of the 20pin cable when reverse
gear is engaged, it will automatically be switched to the rear-view camera input CAM while
reverse gear is engaged.
The 12 V power supply for the rear-view camera (max 3A) has to be taken from the
green wire of the 20pin cable to avoid an unnecessary permanent power supply to
the camera electronic.
For the operation, both green cables have to stay connected
