Version 06.04.2017
CI-VL2-SY2-N
P
a
g
e
7
2.
Installation
To install the interface, first switch off the ignition and disconnect the vehicle’s battery.
Please read the owner`s manual of the car, regarding the battery`s disconnection! If
required, enable the car`s Sleep-mode (hibernation mode)
In case the sleep-mode does not succeed, the disconnection of the battery can be done
with a resistor lead.
If the necessary stabilized power supply for the interface is not taken directly from the
battery, the chosen connection has to be checked for being constantly stabile.
The interface needs a permanent 12V source!
2.1.
Place of installation
2.1.1.
Place of installation for the interface-box
The interface is built to be connected behind the vehicle`s monitor and head-unit.
2.1.2.
Place of installation for the daughter PCB
The interface’s daughter PCB is built to be installed in the monitor housing.
