Version 06.04.2017
CI-VL2-SY2-N
P
a
g
e
12
2.5.1. Warning notes, concerning the installation of ribbon cables:
1) The contacting ends of ribbon cables always have to be installed in a straight and precise
180° position to the connector. Each deviation from a perfect contact position will curse
faulty contact and even danger of short circuit
2) The ribbon cable’s contacting side always has to correspond to the contacting side of the
connector, concerning the mounting position.
2.6.
Connecting peripheral devices
It is possible to connect one after-market RGB navigation (or another RGB video source), two
after-market AV-sources and one after-market rear-view camera to the video-interface.
Before final installation of the peripheral devices, we recommend a test-run to detect a
incompatibility of vehicle and interface. Due to changes in the production of the vehicle
manufacturer there’s always a possibility of incompatibility.
2.6.1.
After-Market RGB navigation
Connect the RGB cable’s female 8pin connector to the video-interface's male 8pin
connector. The disconnected grey wires don’t have any function and have to be
isolated.
Connect the RGB cable’s male 6pin connector to the after-Market navigation.
