V-fit MCCT1 Скачать руководство пользователя страница 23

Страница: 23 / 24

Exercise Monitor Instruction

CUSTOMER NOTICE

EXERCISE MONITOR CABLE CONNECTION

In most cases where there is an apparent failure of your Exercise Monitor to work, it is due to incorrect

fitment of the Exercise Monitor cable connections. So, please ensure that there is

NO GAP between the connectors on the Exercise Monitor cables when finally assembled.

For

Jack Plug

fittings, push together the Male & Female ends to make initial contact. Push again to make

final connection. When fitted correctly, the Jack Plug faces will touch each other.

For

2-Pin

fittings, ensure that you carefully line up the contacts in both connectors

and then push firmly together ensuring that the clips lock together.

Before contacting our Customer Support Team (see contact details below), please

re-check all cable connections, disconnecting and re-making where necessary.

Should you encounter any difficulty with the operation of your Exercise Monitor that is not

solved by re-connection, please return it to us at the address below for inspection.

WE REGRET THAT ARE UNABLE TO REPLACE ANY DAMAGED

OR FAULTY UNITS BEFORE INSPECTION BY US.

We reserve the right to repair or replace the Exercise Monitor at our discretion.

Beny Sports Co. UK Ltd.

Unit 8, Riparian Way, The Crossings, Cross Hills, West Yorkshire. BD20 7BW

Tel:

- 01535 637711

Fax:

- 01535 637722

e-mail:

- [email protected] or [email protected]

CUSTOMER SUPPORT is open from 9.00am to 5.00pm from Monday to Friday

BATTERIES

POWER SOURCE

2 x AA (1.5v) POWER CELLS

STORAGE TEMPERATURE

-10°c -

+60°c

NORMAL OPERATING TEMPERATURE

0°c -

+40°c

If the display becomes weak or faint, please replace with the correct

BATTERIES

as above.

To fit the necessary

BATTERIES

- (NOT SUPPLIED) to your Exercise Monitor, remove the

BATTERY COVER

at the

REAR

of the monitor. Carefully fit the batteries by fitting be tween the exposed contacts in the battery compartment.

Ensure that batteries are fitted with the '+' / '-' ends matching the outline on the sticker or in the battery

compartment. Failure to fit batteries correctly may result in damage to your Exercise Monitor that is not covered

by our guarantee.

PLEASE DISPOSE OF OLD BATTERIES CAREFULLY AND CONSIDERATELY.

Page

Содержание MCCT1

























Результаты поиска

Содержание MCCT1

Отзывы:

Похожие инструкции для MCCT1

Бренды по названию

Популярные бренды

V-fit MCCT1, Сборка и руководство пользователя

Результаты поиска

Содержание MCCT1

Отзывы:

Похожие инструкции для MCCT1

Бренды по названию

Популярные бренды