background image

CAUTIONS 

 

1. This unit is legal for trade only when it is sealed 

(and/or stamped) and bearing a serial number. Do not 

attempt to break the seal (or stamp) affixed to this 

scale or remove the serial number. Contact your dealer 

for more information and after sales service. 

 

2. For most accurate weighing result, do not use this 

scale in where or when the environment condition falls 

beyond as those listed on 

SPECIFICATIONS

 

3. Do not attempt to open this unit or conduct any trouble 

shootings other than those listed on 

TROUBLE SHOOTING

No user serviceable parts inside. 

 

4. Do not submerge scale into water. 

 

5. Do not use pressurized water nozzle for cleaning. 

 

6. Do not use this scale for chemical substances or in 

any environments that contains chemical vapor. 

 

7. Precision measuring instrument, handle with care. 

 

8. Always apply the battery cap when not in charging. 

 

1. INSTALLATION 

 

1.1  Check and make sure that the following accessories 

are included: 

This operation manual 

Scale x 1 

Stainless steel cover x 1 

Power adaptor x 1 

 

Contact your dealer if any item is missing. 

 

1.2  Place the stainless steel platter onto the plastic 

platter. 

1.3  Power on the scale 

a. Before charging the scale or power on with the 

adaptor supplied. Please make sure the input 

voltage listed on the back of the adaptor matches 

with the local voltage. If not, do not use it 

and contact your dealer immediately. 

b. Before first time use, charge the scale for at 

least 8 hours to ensure the best performance. 

c. After battery is fully charged, remove adaptor 

from scale. Apply the battery cap (

FIG 1 C

) to 

seal the DC input jack of scale.  

Содержание TDW-3000













Отзывы: