UWE TDW-3000 Скачать руководство пользователя страница 12

Страница: 12 / 12

Check

Is the stainless steel platter cover placed

on the platter?

Action

Place the stainless steel platter cover

onto the platter.

7. DAILY CARE AND MAINTENANCE

7.1

Clean the scale with a soft and damp cloth. If

necessary, apply a mild detergent.

7.2

Do not use any harsh, abrasive material,

acetone, volatile solvent, thinner or alcohol

for cleaning.

7.3

Verify the accuracy of scale periodically.

Re-calibrate the scale if necessary.

NOTE:

In some countries, calibration is restricted to

be done by an authorized/qualified agent only. Contact

your dealer for more information.

7.4

The scale must be placed horizontally during

transportation or long time storage.

7.5

Remove platter from scale before transportation

or long time storage.

7.6

Store scale in a dry and clean place.

Содержание TDW-3000













Результаты поиска

Содержание TDW-3000

Отзывы:

Похожие инструкции для TDW-3000

Бренды по названию

Популярные бренды

UWE TDW-3000, Руководство по эксплуатации

Результаты поиска

Содержание TDW-3000

Отзывы:

Похожие инструкции для TDW-3000

Бренды по названию

Популярные бренды