A700 Step-by-step maintenance procedures.
8
6. With the adjustable
orifice slots at the 12 and
6 o‟clock position –
install
the 132 o-ring using both
thumbs.
1.
Push the “mouthpiece
support”
(trim collar) onto
the case tube, and then fit
the mouthpiece.
Orient SCUBAPRO® on
top.
7. Apply a dot of quality
lubricant to the beginning
threads. This will ensure
easier removal during the
next service.
Simply
push orifice into inlet
tube. No adjustment
yet
!
2. Spread and fasten the
specialized hook and lock
clasp. (Cam action).
Note: Position the clasp
opposite the “dive
switch”, avoiding
interference.
8. Refresh the poppet
with the new o-rings and
LP seat supplied in the
maintenance kit.
Push lubricated o-rings
into the grooves.
9. Pull the second o-ring
onto the stem and use
your nail to pull passed
the first and into the
(inside) groove.
Apply a
“
bead
”
of
quality lubricant
between the o-rings.
10. Utilizing a clean hard-
flat surface
–
firmly
press
the poppet onto the LP
seat, uniformly.
Note: It may be helpful to
heat the exhaust T,
warming a bowl of hot
water in the micro wave
or using a hair dryer.
Note: Wipe the surface of
the newly installed LP
seat, to remove
manufacturing residues.
Reassembly…
Install the exhaust T.
3.
With thumbs inside the
larger T outlets, position
and angle the exhaust T
into the section between
the mouthpiece-tube
and ex. valve retainer-
ring. Feel for the
exhaust valve retainer-
ring.
4.
Grasp the case from the
other side with fingers.
5.
Press together
and “roll”
your thumbs forward
“feeding” the remainder
of the T onto the ring.
