Uvitron International PORTA-RAY 400/600W Instruction Manual, Rev. E
Page 3 of 22
INTRODUCTION
1
1.1 Purpose Of Manual
The purpose of this manual is to provide installation, operation and troubleshooting
instructions for the Uvitron International
PORTARAY
Light Cure System. It is important the
manual be read carefully before any attempt is made to install and operate the equipment.
1.2 Purpose Of Equipment
The system is a portable light source, designed for rapid
curing of photo-initiated adhesives, coatings, inks and paints.
The unit is suitable for laboratory use or volume production
applications.
1.3 Unpacking
Visually inspect the shipping carton for physical damage.
Damaged shipping cartons should be reported to the carrier.
Carefully open the carton and remove the equipment, being
careful not to lose or damage any separately packed parts.
Check all parts against the parts list. Any damaged or
missing parts should be reported to the carrier and to your
UVITRON representative.
All packing material and the shipping carton should be saved
in case the unit has to be returned at some future time.
1.4 List Of Included Parts
1. One PortaRay 400 or 600W lamp head.
2. One 400 or 600 Watt UVA enhanced arc lamp (installed) - other spectral versions
optional.
3. One lamp headrest / mini curing chamber with or without drawer (as specified at time
of purchase).
4. One pair of UV/IR protective glasses.
5. One AC power cord.
6. One PortaRay
owner’s manual.
7. (OPTION) One bottom accessory compartment with latches.
