Uvitron International INTELLI-RAY 600 Instruction Manual, Rev. T
Page 5 of 36
INSTALLATION (CONTINUED)
2
The lamp housing assembly can also be placed on a shelf type structure, supporting the unit by
its bottom outside edges. For this type of mounting, a windowed hole must be cut in the shelf,
which would provide adequate clearance for the unit’s bottom-side light exposure opening, and
also for the cooling air exhaust holes.
2.3 Shielding
All installations should incorporate adequate shielding of radiated UV light, in order to prevent
eye and skin burn of the operator or others passing through the work area (refer to UV Safety
Warning in the following Safety Considerations section of the manual). The optional UV0455
Flood Shield and the UV1094 Backside Flood Shield can be used with the IntelliRay to minimize
the amount of stray UV light scattering in the work area. Custom shielding may be constructed
using sheet metal, UV blocking acrylic or polycarbonate to prevent operator exposure to UV
radiation.
WARNING:
To prevent risk of eye or skin burn, all personnel must be protected from
direct or indirect exposure to the UV light produced by the IntelliRay curing system.
Extreme care should be used when designing custom UV shielding to insure personnel
will not be exposed to harmful UV radiation. Additionally, UV protective glasses and
protective clothing should be used at all times while working in the vicinity of the UV
curing system.
2.4 Dimensions
Fig. 3, IntelliRay overall dimensions
