UTT Technologies
Appendix A FAQ
http://www.uttglobal.com Page 72
Appendix A FAQ
Q: How to configure your TCP/IP?
A:
There are two methods of configuring TCP/IP properties: one is to manually configure TCP/IP
properties; the other is to automatically configure TCP/IP properties with DHCP. The following
describes the configuration procedure of these two methods respectively.
Method One: Manually Configuring TCP/IP
To configure the TCP/IP protocol manually, do the following:
1) On the Windows taskbar, click
Start > Control Panel > Network and Connection > Local
Area Connection
, right click
Local Area Connection
, and choose
Properties
.
2) In the
Properties
dialogue, double click
Internet Protocol Version 4 (TCP/IPv4)
.
3) In the
Internet Protocol Version 4 (TCP/IPv4)
dialogue, select the
Use the following IP
address
radio button, Enter 192.168.1.x (x is between 2 and 254, including 2 and 254) in the
IP
Address
box, enter 255.255.255.0 in the
Subnet Mask
box, and Enter the IP address of the
Device’s LAN interface (default value is 192.168.1.1) in the
Default gateway
textbox.
4) Select the
Use the following DNS server addresses
radio button, Enter the IP address of
DNS server into the
Preferred DNS server
textbox.
Содержание SOHO AC650W
Страница 1: ...User Manual SOHO Wireless Router...