UTT SOHO AC650W, Руководство пользователя, Страница: 10 / 84

UTT Technologies Hardware Installation
http://www.uttglobal.com Page 5
Figure 1-2 Back Panel-UTT AC650W
Interface/Button Description
LAN
These interfaces provide a LAN connection to network devices, such as PCs
or switches.
WAN
The WAN interface is connected to your Internet device, such as a cable or
modem.
USB Plug-in a USB storage for data sharing.
PWR The PWR interface is where you connect the provided power adapter.
Reset
Reset current settings to the factory default settings. When the Device is
powered on, use a pin or paperclip to press and hold the Reset button for
more than 5 seconds, and then release the button. After that, the Device will
restart with the factory default settings.
On/Off Press this button to turn the Device on/off.
Note: The reset operation will clear all the settings that you have configured.
Table 1-2 Interfaces and Buttons Description
1.2 Installation Guideline
When determining where to place the Device, please observe these guidelines:

Make sure that your workbench or standard rack is level and stable.

Do not place heavy objects on the Device!

Make sure that there is proper heat dissipation and adequate ventilation around the Device.

Position the Device out of direct sunlight and away from sources of heat and ignition.

Please install the Device in a place far away from the High Power Radio or Radar Station.

Keep the Device far away from water!

Please use the supplied power cord.