UTStarcom PLS7000, Руководство по эксплуатации телефона

Страница: 163 / 171

Section 4A: Safety 153
handset on your body, use the supplied or approved carrying case,
holster or other body-worn accessory. If you do not use a body-worn
accessory, ensure the antenna is at least 7/16 inch (1.5 centimeters)
from your body when transmitting. Use of non-approved accessories
may violate FCC RF exposure guidelines. For more information about
RF exposure, visit the FCC Website at
www.fcc.gov
.
Specific Absorption Rates (SAR) for Wireless Phones
The SAR is a value that corresponds to the relative amount of RF energy
absorbed in the head of a user of a wireless handset.
The SAR value of a phone is the result of an extensive testing, measuring
and calculation process. It does not represent how much RF the phone
emits. All phone models are tested at their highest value in strict
laboratory settings. But when in operation, the SAR of a phone can be
substantially less than the level reported to the FCC. This is because of a
variety of factors including its proximity to a base station antenna,
phone design and other factors. What is important to remember is that
each phone meets strict federal guidelines. Variations in SARs do not
represent a variation in safety.
All phones must meet the federal standard, which incorporates a
substantial margin of safety. As stated above, variations in SAR values
between different model phones do not mean variations in safety. SAR
values at or below the federal standard of 1.6 W/kg are considered safe
for use by the public.
The highest reported SAR values of the
PLS7000
are:
AMPS mode (Part 22):
Head: 1.37 W/kg; Body-worn: 0.777 W/kg
PCS mode (Part 24):
Head: 1.06 W/kg; Body-worn: 0.412 W/kg
FCC Radiofrequency Emission
This phone meets the FCC Radiofrequency Emission Guidelines.
FCC ID number:
O6YUTS-C2000
.
More information on the phone's SAR can be found from the following
FCC Website:
http://www.fcc.gov/oet/fccid
.
Safety