Utility Solutions Jack Jumper SMD-20, Руководство по эксплуатации и техническому обслуживанию

Страница: 3 / 8

3 C-00829 USJJ-005 Manual Rev. 6.5 (8-15-14)
Product Description
The Jack Jumper™ Cutout Bypass Tool permits a safe and quick method to bypass
an overhead cutout without the tedious use of bulky jumper cables. The tool is
indispensable for fuse coordination tasks and permits easy bypass of an underground
dip. The Jack Jumper™ Cutout Bypass Tool saves time and money, eliminates risk of
service interruption and prevents accidental cross phasing.
The primary purpose of the Jack Jumper™ Cutout Bypass Tool is to provide temporary
fuse replacement when performing fuse coordination on cutouts. The Jack Jumper™
Cutout Bypass Tool is rated at 100 Amps continuous on AC current without exceeding
a 40°C temperature rise. It is used to bypass cutouts on both overhead lines and
underground taps. For 200 Ampere SMD-20 systems attach two Jack Jumper™ Cutout
Bypass Tools on opposite sides of the SMD-20 Power Fuse (this only works for SMD-20
Power Fuse Tools and cannot be utilized for standard cutouts).
Installation and removal of the Jack Jumper™ Cutout Bypass Tool is done with a
shotgun stick.
Product Line
USJJ-001 15 kV Cutout Bypass Tool
USJJ-002 27 kV Cutout Bypass Tool
USJJ-003 15 kV Chance™ Loadbreak Cutout Bypass Tool
USJJ-004 15 kV ABB™ Loadbreak Cutout Bypass Tool
USJJ-005 38kV Cutout & S&C™ SMD-20 15 kV Power Fuse Bypass Tool
USJJ-006 S&C™ SMD-20 27 kV Power Fuse Bypass Tool
USJJ-007 S&C™ SMD-20 38 kV Power Fuse Bypass Tool
USJJ-008 27 kV Chance™ Loadbreak Cutout Bypass Tool
USJJ-009 27kV ABB™ Loadbreak Cutout Bypass Tool
Top Perpendicular
Ring
Spring Mechanism
Bottom In-Line Ring
Upper
Attachment Hook
Lower
Attachment Hook