When using electrical appliances, follow basic safety precautions to reduce the risk of fire,
electrical shock, personal injury and property damage. Read all safety precautions, and familiarize
yourself with this manual prior to use.
WARNING: Use your heater only as described in this manual. Any other use is not recommended
by the manufacturer and can cause fire, electrical shock, personal injury and property damage.
SAFETY PRECAUTIONS
•Your heater is for INDOOR HOUSEHOLD USE ONLY. DO NOT use your heater outdoors, or for
industrial or commercial purposes.
•DO NOT depend on the power control switch as the sole means of disconnecting power from
your heater. Disconnect the power cord from the electrical outlet when your heater is not in use,
when changing locations, or prior to cleaning.
•Place your heater on a stable, level surface, and route the power cord away from traffic areas.
•Connect the power cord to an easily-accessible electrical outlet so that your heater can be
disconnected immediately in the event of an emergency.
•Ensure that 12 in. of clearance exists around your heater to avoid obstructing intake and exhaust
flow.
•For optimal operation and to avoid overloading a circuit, connect your heater to circuit that is not
supplying power to other electrical appliances.
•DO NOT operate your heater near curtains, plants, window covers, or other loose objects; such
objects can become lodged in your heater’s moving components and cause a fire.
•NEVER cover your heater or place your heater or its power cord under rugs, carpeting or similar
objects, as fire can occur.
•Your heater is not intended for use in bathrooms, laundry areas or similar damp locations. Never
place your heater where it may come in contact with water or other liquids.
•DO NOT use devices that would turn your heater on and off automatically, as the use of such
devices can cause a fire.
•Avoid contact with moving parts. NEVER insert your fingers or other objects through the your
heater’s grille.
•DO NOT immerse or expose your heater to any form of liquid.
•NEVER operate your heater near an open flame or in the presence of explosive or combustible
gases or fumes, such as: gasoline, paint or other flammable liquids. Your heater has hot internal
components and components that can spark during normal operation.
Notice to first time users – this unit may emit an odor the first time it is used. This is a normal and
non-toxic emission and it will not continue once the unit has been fully primed.
IMPORTANT INSTRUCTIONS
SAFETY INFORMATION
SAFETY INFORMATION
Please read and understand this entirely before attempting to assemble,operate or install the
product.
•DO NOT expose your heater to excessive heat or humidity, as electrical component damage can
occur.
•DO NOT pull on the power cord. Always grasp the plug when connecting and disconnecting the
power cord from the electrical outlet.
•DO NOT use extension cords with your heater. Extension cords can overheat and cause a fire.
•DO NOT remove, replace, repair or tamper with the originally-supplied plug.
•NEVER attempt to open or service your heater. Doing so may cause personal injury or property
damage. Should your heater or its power cord malfunction or become damaged, discontinue
operation immediately and consult a qualified repair technician.
•Extreme caution is necessary when your heater is used near children, pets and invalids. Keep
your heater out of the reach of children, pets and invalids to reduce the risk of personal injury and
electrical shock.
SAFETY FEATURES
Tip-Over Safety Feature
This heater is equipped with a tip-over safety feature. Once the heater is tipped over, an internal
switch will automatically shut the heater off. Once the heater is restored an upright position, the
heater will reset. To continue operation, turn on the heater using the supplied remote control or
the control panel on the heater.
Overheat Safety Feature
This heater is equipped with an overheat safety feature. When the heater's internal components
reach a certain temperature that could cause overheating and a possible fire, the heater will
automatically shut off.
To reset your heater when the overheat protection system has been activated, perform the
following:
1.Turn the power control switch to the ‘OFF’ position, and turn the temperature control switch to
the lowest setting.
2.Disconnect the power cord from the electrical outlet.
3.Allow your heater to cool down for approximately ten minutes.
4.Ensure that both the intake and the exhaust vents are clear of obstructions.
5.Connect the power cord to the electrical outlet.
6.Turn the power control switch to the ‘HIGH’ position, and turn the temperature control switch
to the highest setting.
7.If your heater does not operate normally, turn the power control switch to the ‘OFF’ position,
disconnect the power cord from the electrical outlet, and consult an authorized repair technician.
WARNING:
It is normal for the power cord to feel warm to the touch; however, a loose fit between
the outlet and the plug may cause overheating of the plug. If this occurs, try inserting the plug into
a different outlet. Contact a qualified electrician to inspect the original outlet for damage.
THIS APPLIANCE HAS A POLARIZED PLUG (one blade is wider than
the other). To reduce the risk of electric shock, this plug is intended to fit
in a polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician to install
the proper outlet.
DO NOT ATTEMPT TO MODIFY THIS PLUG OR CHANGE
THIS SAFETY FEATURE IN ANY WAY.
SPECIFICATION
Voltage Rating
120 V (60 Hz)
Power Consumption
600W/900W/1,500 W
Unit Size
10 in. (W) x 14.3 in. (D) x 25.1 in. (H)
Unit Weight
18.1 lbs.
3
Lowes.com
2
Lowes.com
