Overview
4. When the top edge the machine’s receiving plate is seated in the receiver mounting plate
on the MC450, curl the machine’s mounting plate backwards while raising the arms of the
mini skid steer to allow the lower edge of the machine’s mounting plate to slide into
position.
5. Shut the engine off.
6. Check to see that the pins into are locked into position securing the attachment to the
machine.
7. Start the engine and raise the attachment off the ground. Visually inspect the bottom edge
of the attachment’s mounting plate to make sure that both of the attachment lock pins are
securely holding the attachment in position. If the pins are not engaged shift the unit Left
or Right until the pins drop into the locked position. Lower MC450 to the ground and turn
off the mini skid steer.
8. Ensure that the attachment is not lifted beyond the maximum reach of the unit's loader
arms
MC450 Coring Unit. Operator’s Manual
© 2020 Utilicor Technologies Inc.
4
1-Locked Positon
2-Unlocked
Position
