UTIFORM Delta-Mini, Инструкция по эксплуатации

Страница: 8 / 62

Mini Pump 7
14.- Security and accident prevention devices should not be removed or modified, and
these must be handled correctly.
15.- Whenever the machine is being cleaned or repaired it should be turned off at the
mains switch, otherwise the pneumatic remote control could start up the main motor by itself.
16.- Before starting the machine the operating safety of this must be checked. As soon as
any faults are detected, or even indications of these, they should be eliminated immediately and
the personnel supervisor notified. In the case of finding any faults that may endanger operating
safety, use of the machine must be interrupted.
17.- If an accident happens as a result of not having respected the safety measures given
here, or the safety measures in the work place as established by professional associations or by
the insurance company with relation to civil responsibility or your country’s legislation, or
caused by negligence, then the legislator will hold the machine operator responsible or, in the
case that this person could not be held responsible due to lack of training or basic knowledge,
then the personnel supervisor will be held responsible.
For all these reasons, when you are working with the Mini, please do so with caution and bear in
mind the safety measures that apply in each case (safety measures for the association of
construction professionals relative to conveyors and spraying machines).
Below you will find some brief safety instructions to be followed for the correct
use of this machine onsite.
4.1 Safety
4.1.1 Designated use
This machine has been designed and built for safe operation in accordance
with current technological levels. However the machine may present a danger if it
is used inadequately or for an unintended use or one not included in this user
manual.
Pay special attention to
this symbol in this chapter!