11938027 Rev A
- 6 -
© 2016 UTC RETAIL
Appendix A
Programming Guide: 3190 Rear Customer Display
Note: If you are using the customer display with an OPOS, JavaPOS, or POS for .Net application, this document
does not apply to you. You will need to use the correct driver available on the UTC RETAIL web site at
www.utcretail.com
.
The 3190 Rear Customer Display (RCD) operates by converting recognized data, supplied by serial communication,
into a display message. The supplied data may also contain commands that control the display.
The 3190 RCD uses a limited command structure for display control, requiring minimal programming effort. The
table below lists the display control features of the 3190 RCD and control codes (in ASCII, DEC, and HEX
expression). The display control command structure, with examples, is described in this section.
Display Control Features and Commands
The following table outlines the 3190 RCD control features and commands:
Feature
ASCII
DEC
HEX
Dimming
<EOT>x
04, x
04, x
Back Space
<BS>
08
08
Horizontal Tab
<HT>
09
09
Line Feed
<LF>
10
0A
Carriage Return
<CR>
13
0D
Display Position
<DLE>p
16, p
10, p
Normal Display
<DC1>
17
11
Vertical Scrolling
<DC2>
18
12
Reset
<US>
31
1F
Flashing Text Start
<FS>
28
1C
Flashing Text Stop
<GS>
29
1D
Clear to End of Line
<CAN>
24
18
Clear to End of Display
<EM>
25
19
Home and Clear Display
<RS>
30
1E