background image

© 2016 UTC RETAIL

 

- 3 - 

11938027 Rev A 

Product Information 

The 3190 Series POS Workstation is designed for use in specialty retail stores, restaurants, convenience stores, 
cafeterias and other retail establishments. It is highly configurable, has easy access to connectors, and a large 
selection of interface ports for connectivity to printers, cash drawers, scanners, keyboards, and other peripherals. 

Product Components 

The 3190 Series product includes:  

 

3190 Series main unit  

 

AC Line Cord 

Depending on the configuration you have purchased, the following optional components may also be provided: 

 

Magnetic Strip Reader (MSR) unit  

 

Rear Customer Display (RCD) unit  

 

WLAN Kit (802.11 b/g/n) 

Product Safety 

 

DANGER: High Voltage 

 

This unit contains high voltage. There is a risk of electrical shock if the case is opened. If service is required, contact an 
authorized service agent or UTC RETAIL. 

WARNING: CMOS Battery Damage 

 

Replace your system's battery only with CR-2032 (or equivalent) 3V Lithium-Ion coin cell battery to avoid risk of 
personal injury or physical damage to your equipment. Always dispose of used batteries according to local ordinance, 
where applicable. Any damage due to not following this warning will void your warranty 

WARNING: Access to Internal Components 

 

All access to internal components of the 3190 Series unit is restricted to Authorized Service Personnel only. Opening 
the case or service by anyone else will automatically void the warranty on this product. 

WARNING: Electrical Shock 

 

Use caution when connecting cables. To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits 
to telephone-network voltage (TNV) circuits. Local Area Network (LAN) ports contain SELV circuits, and telephone 
ports contain TNV circuits. Some LAN ports and some telephone ports use RJ-45 connectors. 

CAUTION: 

 

If your 3190 contains the WLAN accessory: This 3190 complies with FCC radiation exposure limits for an uncontrolled 
environment. The 3190 should be installed and operated at a distance greater than 20 centimeters (8 inches) between 
yourself and any bystander to comply with the Radiation Exposure Requirements. Changes or modifications not 
expressly approved by UTC RETAIL could void your authority to operate the 3190. 

CAUTION: 

 

Damage to the logic module components may occur if AC power is not removed from the product prior to attaching any 
accessories. 

CAUTION: 

 

Do not 

hot plug to the rear panel serial ports. Turn off the 3190 Series Unit before connecting serial port cables. 

CAUTION: 

 

Do not 

use the Magnetic Stripe Reader (MSR) unit as a handle when moving or carrying the 3190 Series. 

Содержание 3190 Series












Отзывы: