© 2008 UTC RETAIL. All rights reserved.
11501020 Rev C
2200 Series POS System Installation Guide
All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic or mechanical, including photocopying, recording,
or otherwise, without the prior written permission of UTC RETAIL.
This User Guide was prepared by UTC RETAIL for use by Qualified Service Personnel only. All
attempts have been made to ensure that the information presented in this manual is correct. No
liability, expressed or implied, will be assumed by UTC, its dealers, or affiliates, for damage resulting
from the use of this information.
If a unit needs to be shipped to UTC RETAIL for repairs, please return it in the original packaging
material and shipping container. If you purchased the 2200 Series POS System through a dealer, and
the dealer is unable to answer your questions, please call UTC RETAIL’s Technical Support at
1.800.349.0546.
This equipment has been tested and found to comply with the limits for a Class “A” digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in which case
the user will be required to correct the interference at his/her own expense.
WARNING: CMOS Battery Damage
Replace your system’s CMOS RAM battery only with identical CR-2032 3V Lithium-Ion coin cell
(or equivalent) battery type to avoid risk of personal injury or physical damage to your
equipment. Always dispose of used batteries according to the manufacturer’s instructions, or as
required by the local ordinance (where applicable). The damage due to not following this warning
will void your motherboard’s manufacture warrantee.
All access to internal components is restricted to Authorized Service personnel only.
If applicable, the key for this device should be in the possession of Qualified Service Personnel
Only and used for access by an Authorized and Qualified Service Person.
