NX-7002N Installation Manual
Page 26
05/06/13
2 =
On: GSM PSU voltage failure
The main battery creates a 3.8 V power supply for the GPRS
modem.
3 =
On: Bus voltage failure
The bus supplies a 13.8 V voltage to the NX-7002N.
4 =
On : Communication channel failure
5 =
On : Up/download session in progress
6 =
On : Up/download session starting
7 =
On : Reporting in Progress
8 =
On : RSSI level at acceptable level
Segment 3
1 =
On: Maximum reports in 24 hours reached
2-8
Reserved
LOCATION 175 GSM MODEM MANUFACTURER (READ ONLY) (16 segments)
This location displays the manufacturer of the GSM/GPRS modem used on the NX-
7002N.
LOCATION 176 GSM MODEM MODEL (READ ONLY) (16 segments)
This location displays the model of GSM/GPRS modem used on the NX-7002N.
LOCATION 177 GSM MODEM SOFTWARE REVISION (READ ONLY) (16 segments)
This location displays the software revision of the GSM/GPRS modem used on the NX-
7002N.
LOCATION 178 GSM MODEM SERIAL NUMBER (READ ONLY) (16 segments)
This location displays the serial number of the GSM/GPRS modem used on the NX-
7002N.
LOCATION 179 –
LOCATION 199 RESERVED
LOCATION 200 MISCELLANEOUS FEATURE SELECTION (8 segments)
Segment 1
Reserved
Segment 2
1=
Enables HomeText Control.
2=
Allows Home Text Control using Registered phones only.
On : only commands from registered phone numbers are
accepted
Off : commands from any phone number are accepted
3=
Home Text Control requires Password.
On : A password must be included with the HomeText message
Off : A Password only required for HomeText messages from
unregistered phone(s)
Passwords must be between 6 and 16 characters and contain at
least one number between 0-9. They should only have
alphabetic numbers and no spaces. See locations 248 – 263.
4=
NX-7002N will forward unrecognized received SMS messages to
the Administrator Phone (= Phone number 1).
