NX-7002N Installation Manual
Page 12
05/06/13
1.5 Enrolling the SIM card on the GSM network
Insert the SIM card. See
Inserting the SIM card
for more information.
Power up the NX-7002N GPRS module.
Enter programming mode. See
Programming the NX-7002N GPRS module
for more
information.
Press
78#
to select the module.
Press
169#
to enter the
GSM SIM PIN code
location.
Enter the first digit of the SIM PIN code. Press
*
to move to the next segment.
Continue in this way until all digits are programmed. Press
#
to save the changes
and exit the location.
Exit programming mode. The SIM is automatically enrolled on the GMS network.
Note: Each time you exit programming mode, the modem restarts and reads the
PIN number, network operator and SMSC address number from the NX-7002N
configuration.
1.6 Enrolling the SIM card on the GPRS network
Enter programming mode.
Press
78#
to select the module.
Press
169#
to enter the
GSM SIM PIN code
location.
Enter the first digit of the SIM PIN code. Press
*
to move to the next segment.
Continue in this way until all digits are programmed. Press
#
to save the changes
and exit the location.
Obtain an Access Point Number from the supplier. Press
60#
to enter the
Name of
GPRS access point – APN
location. Enter the first digit of the APN. Press
*
to move
to the next segment. Continue in this way until all digits are programmed. Press
#
to
save the changes and exit the location.
(Optional) You may need to enter the PPP password and PPP User ID required by
the network. To do this, press
32#
to select the
PPP (dial-up account) user ID
location and program the password. Then press
34#
to select the
PPP (dial-up
account) password
location and program the user ID. This step is not usually
required.
Exit programming mode. The SIM PIN is automatically enrolled on the GSM network.
