UTC Fire and Security Interlogic NetworX NX-7002N Скачать руководство пользователя | Manualshive

Страница: 14 / 55

background image

NX-7002N Installation Manual

Page 14

05/06/13

P

ROGRAMMING THE LOCATIONS

LOCATION 0

MODULE MODE OF OPERATION FEATURE SELECTION (8 segments)

This location contains the system characteristics.

Segment 1

1 =

Enable site initiated downloading (*98 from a keypad)

2 =

Enable remote initiated downloading

This setting enables the PC to dial into the NX-7002N. It is
dependent on other settings (segment 3, 5 and 6).

3 =

Remote initiated download must be from known source

If enabled, program the phone number of the PC in location 168.

4 =

Enable remote download at test time

This setting configures the NX-7002N to automatically dial the PC
to initiate an upload/download session after an autotest. You must
program the autotest in the control panel.

5 =

Enable auto-answer incoming CSD GSM download call.

If enabled, the NX-7002N will automatically accept an incoming
call.
If disabled, the user needs to accept an incoming call (*99) as
soon as a “ding-dong” is heard on the keypad.

6 =

Callback required for incoming CSD GSM download call

If enabled, the NX-7002N will call back to the PC before starting
an up/download session.

7 =

Use V.110 for site-initiated CSD GSM calls

Enable this setting if the PC is on an ISDN line and is using an
ISDN modem.

8 =

Use non-transparent mode for site initiated CSD GSM calls

If you are experiencing problems with upload/download, change
this setting from transparent mode to non-transparent mode or
vice versa.

Segment 2

1 =

Use SIA DCS as backup format (Contact ID if off)

This setting selects the reporting format when using another
device as backup. The same format must be set on the backup
device.

2-8

Reserved

Segment 3

1 =

Reserved

2 =

Polling enable for TCP/IP (for UL AA)

If polling is enabled, set the polling period in location 162,
segment 6.

3-8

Reserved

Segment 4

1-3

Reserved

4 =

On : TCP/IP reporting in SIA
Off : TCP/IP reporting in Contact ID

5-6

Reserved

7=

Enable 3-DES encryption. DO NOT disable this option.

8=

On : Up/Downloading using GSM CSD
Off : Up/downloading using GSM GPRS

Segment 5-8

Reserved

«
...
12
13
14
15
16
...
»

Содержание Interlogic NetworX NX-7002N
























































Отзывы:

Нет отзывов

Похожие инструкции для Interlogic NetworX NX-7002N

Бренд: Quectel Страницы: 31

Бренд: Kamstrup Страницы: 28

Бренд: OGEMRAY Страницы: 21

Бренд: Weidmüller Страницы: 52

Бренд: SOFTLINK Страницы: 32

Dragonfly MTQ-LSP3-B03

Бренд: Multitech Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды