Utax LP 3128, Инструкция по эксплуатации

Страница: 77 / 111

5-2 Troubleshooting
General Guidelines
The table below provides basic solutions for problems you may
encounter with the printer. We suggest you consult this table to
troubleshoot the problems before calling for service repairs.
Tips
Printer problems may be solved easily by following the tips below. When
you have encountered a problem that cannot be solved following the
guidelines above, try the following:
• Restart the computer you are using to send print jobs to the printer.
• Obtain and use the latest version of the printer driver. The latest
versions of printer drivers and utilities are available at:
http://www.
utax
.com
(
download
centre)
.
• Make sure that the procedures for printing are correctly followed in
the application software. Consult the documentation supplied with
the application software.
Symptom Check Items Corrective Actions
The printer will not print
from the computer. Check the Ready indicator. Using the information on page 1-5 , check if an error
has occurred and clear the error.
Check if a status page can be printed. If the status page was printed successfully, there
may be a problem with the connection to the
computer. Refer to the
Installation Guide and check
the connection.
Check that the indicators display in a
recognized combination. Refer to
Indicators on page 1-5 for further
information.
Turn the power switch Off (O) and then On ( | )
again. Print the job again.
Print quality is poor. Refer to Print Quality Problems on page 5-3 .
Paper is jammed. Refer to Cleaning Paper Jams on page 5-9 .
The indicators are off and
the fan is not working. Check the power cord . Connect both ends of the power cord securely. Try
replacing the power cord. Refer to Installation Guide
for information.
Check the power switch is in the
On ( | ) position.
Refer to the Installation Guide for more information.
The printer prints a status
page but data from the
computer is not being
printed. Check program files and application
software. Try printing another file or using another print
command. If the problem occurs with a specific file or
application, check the printer settings for that
application.
Check the interface cable . Connect both ends of the interface cable securely.
Try replacing the printer cable. Refer to the
Installation Guide for more information.