Utax LP 3128 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 111

background image

ix

Compliance and Conformity

FCC Statement (for users in the United States and Canada)

This device complies with Part 15 of FCC Rules and RSS-Gen of IC
Rules. Operation is subject to the following two conditions; (1) this
device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation of the device.

This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more
of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and the receiver.

•

Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.

Properly shielded grounded cables and connectors must be used for
connection to host computer and/or peripherals in order to meet FCC
emission limits.

Precautions for Use

Any modifications without prior permission of

UTAX GmbH

may cause

harmful interference.

If any modifications or changes are made to this equipment without prior
permission of

UTAX, UTAX

as the manufacturer does not guarantee

the compliance with the FCC Rules. The use of equipment that does not
comply with the FCC Rules is prohibited.

«
...
9
10
11
12
13
...
»

Содержание LP 3128
















































































































Отзывы:

Нет отзывов

Похожие инструкции для LP 3128

Бренд: Oki Страницы: 215

Бренд: Canon Страницы: 521

Бренд: Canon Страницы: 456

Бренд: Oki Страницы: 128

Бренд: Cashino Страницы: 51

Бренд: Roland Страницы: 36

Бренд: LulzBot Страницы: 3

Бренд: SPRT Страницы: 21

Бренд: Printekmobile Страницы: 2

Бренд: Xerox Страницы: 284

Бренд: Hamlet Страницы: 76

Бренд: Kyocera Страницы: 207

Бренд: Black Box Страницы: 30

Бренд: WOOSIM Страницы: 27

WorkCentre 3315

Бренд: Xerox Страницы: 18

Бренд: MINOLTA-QMS Страницы: 48

Бренд: Sawgrass Technologies Страницы: 58

Бренд: Samsung Страницы: 189

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды