Utax Faxsystem, Инструкция по эксплуатации

Страница: 19 / 200

Section 1 Fax Operation (Names of Parts / Preparations / Features and Functions of this Fax)
1-7
Turning TTI Transmission ON/OFF (TTI
setting)
The TTI (Transmit Terminal Identifier) refers to information –
such as the time of the transmission, the number of pages, your
station name and fax number, etc. – that is automatically sent to
the receiving party's fax and printed out on the received
documents. With this fax, you can select here whether or not that
TTI information will be sent to the receiving party's fax, and – if it
is – whether it will be printed inside or outside the border of the
transmitted page.
* Prior to operation, check the message display to make sure that
the touch panel is in the initial mode for fax operation.
(Refer to “What is the “Initial Mode”?” on page 1-11.)
* If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the basic copy screen.
Press the Default key. The Default Setting screen will
appear.
Press the “FAX default” key.
(inch)
(metric)
Press the “
T
” cursor key until “TTI” is highlighted and
then press the “Change #” key.
If you want your TTI information to be sent to the other
party, press the desired location where you want it to be
printed.
If you do NOT want it to be sent, press the “Not Printed”
key.
(inch)
(metric)
Press the “Close” key. The message display will return to
the same screen as was displayed in step 3.
If you are finished making settings, press the Reset key to
return to the initial mode.
1
2
3
4
5
6