Utax Faxsystem, Инструкция по эксплуатации

Страница: 185 / 200

Section 10 Reference Information
10-3
If the drawers do not contain paper that is of a size and orientation exactly the same as that of the received documents, the FAX will
automatically select the most appropriate paper for print out. The following chart indicates the order of priority for paper selection in such a
case.
<Notes for this Chart>
* The abbreviations in the chart above refer to the following paper sizes:
ST: 5-1/2" x 8-1/2" [width-wise]
STR: 5-1/2" x 8-1/2" [length-wise]
LT: 8-1/2" x 11" [width-wise]
LTR: 8-1/2" x 11" [length-wise]
LG: 8-1/2" x 14"
LD: 11" x 17"
* The top edge of the paper in these illustrations indicates the direction of feed for transmission or print out.
* If the same size of paper is set in more than one location, the upper drawer will have priority for paper feed.
* If the either of the Fixed Size or Fixed Cassette modes are selected in the Paper Feed Selection Mode setting, that setting will take precedent
over the order indicated here.
*1: Indicates that the Rotate Received Data function will be used.
*2: When the image of received documents is automatically reduced to fit onto the paper, 8-1/2" x 14" size images will be reduced to fit onto
8-1/2" x 11" [length-wise] size paper.
: Indicates that a received page will be split and printed onto 2 or more separate sheets of paper.
Paper Size and Priority Feed Chart (Inch version)
Received Document Size
Order of
Selection
Pa
per in
D
ra
w
ers