utano
Outdoor Mobile Phones V1 + V2
76
Technical-Service-Hotline: +49 (0) 1805 11 04 02
17.4.5
Change password
It’s impossible to change the password of SIM1 and SIM2, with the passwords more than 4 numbers and less or equal to 8 numbers
with confirmation to change the password successfully.
17.4.6
SIM 2 security setup
The Same as SIM 1.
17.4.7
Phone lock
Your phone can be protected from being stolen and used by this function.
Access the submenu, and you can set the following items:
Allow you to select On and enter the Phone lock code. Next time you power on the device, a correct password is required. If the Phone
lock has been activated, you can choose Off to deactivate the protection.
Note:
The Phone lock code as default is 1122.
17.4.8
Auto Keyboard lock
Allow you to choose close, 5 seconds, 30 seconds, 1 minute or 5 minutes.
In the standby screen manually lock the keyboard is defined as:
Hung up key & # key
Manually unlock is defined as: Right soft key & # key
17.4.9
Change password
Allow you to change the phone password.
17.4.10
Restore factory settings
In this menu, enter the phone password and press Ok. Then, the settings of corresponding parameters will be restored as default.
18
Writing Language/Input Method
18.1
Overview
Your device supports the following input methods: English (ABC and abc), numbers, and symbols,etc.
18.2
Key definitions
Ok key: In the interface of Input Method, press Ok to select your required method. While editing a message, press it to access the
“Option” submenu, and finish editing or enter the EMS menu for edit.
Navigation key (Up/Down/Left/Right key): Press to move the cursor or for selection.
18.3
Instructions on input method
18.3.1
e.g. English Writing Language
For this input method, the keypad is defined as below.
