USSC Ashley AP5660, Инструкция по установке и эксплуатации

Страница: 22 / 32

MAINTENANCE - continued
Ash Removal - Freestanding Unit:
Remove the ashes periodically to avoid unnecessary ash build up. Ash removal is as follows:
1. Let
fi re run out and allow unit cool to room temperature
2. Clean the heat exchanger tubes (see Heat Exchanger Cleaning section) – Make sure Pellet Stove is at room temperature
before touching
3. Open the ash pan door, remove the burn pot and empty into metal container
4. Vacuum to remove ashes from the
fi rebox.
BE SURE THAT ASHES ARE COOL TO THE TOUCH BEFORE VACUUMING. Some vacuum cleaners may leak ash
into the room. Your vacuum cleaner should have a special
fi lter or bag to eliminate leakage.
5. Remove ash pan and dispose of ashes into metal container
6. Reinstall ash pan
7. Reinstall burn pot.
Disposal of Ashes
Ashes should be placed in a steel metal container with a tight fi tting lid. The closed container of ashes should be placed
on a non-combustible fl oor or on the ground well away from all combustible materials, pending fi nal disposal. If the ashes
are disposed of by burial in soil or otherwise locally dispersed, they should be retained in the closed container until all
cinders have been thoroughly cooled. Do not place other waste in the same container.
22