Usogood DL502, Руководство пользователя

Страница: 24 / 84

18
EN
The standard application of the DL502 Camera is the 'ON' mode.
In this mode, photos are either triggered by movement sensors or
at intervals
according to the respective setting. Please switch to the
'SETUP' mode, adjust the settings as you want, then switch to the 'ON'
position. The red LED will flash and the screen will count down for 5
seconds to enter working mode automatically.
As soon as wild animals or other objects directly enter the detection
area of the sensor zone, the camera starts to record photos and videos.
■ In the daytime, IR LEDs will not work(the photos and videos in
color). At night, the IR LEDs will start working automatically(photos
and videos in black and white).
Enter ON Mode
Tighten the holder into screw hole
① Drilled holes ③ Tripod bolt
② Counter screw ④ Hinge screws
2. Using the Tripod Socket
1
2
3
4