Usogood DL502, Руководство пользователя

Страница: 13 / 84

7
EN
can also review the recorded files or change the setup options
according to the actual situation.
When the camera is in ‘SETUP' mode, the PIR sensors are on. When
the PIR sensors are triggered, the PIR indicators LED will flash.
Button 'ON'
When the camera is switched from ‘SETUP' mode to ‘ON' mode,
it will enter standby with low power consumption, and the screen
display will turn off and button operation will be disabled. The camera
will respond to the PIR sensors only. It will turn on and take photo
or record videos when the PIR sensor is triggered, then return to
standby afterwards.
Camera Mode
‘Photo’, ‘video’ and ‘photo+video' are available.
In the ‘Photo+Video’ mode, the camera first takes a set number
ofphotos beforerecording a video.
Photo Resolution
24MP/20MP/16MP/12MP/8MP/5MP/3MP/1MP are available. The
higher the resolution, the larger the space occupied on SD card.
Multi-shot
1P/2P/3P are available. You can choose the photo count to be
taken when the camera get triggered.
Video Resolution
3840*2160P, 2688*1520P, 1920*1080P, 1280*720P, 720*480P, 640*480P
are available. The higher the resolution, the larger the space
occupied on SD card.
Universal Keys
Press ‘ ’ and ‘ ’ button to adjust values, press ‘OK’ button to
confirm change and switch to next digit, press ‘MODE’ button to exit
the setting.