MOWOOT II
usMIMA S.L.
User Manual
Version 10
Page. 17/20
MOWOOT II - Electromagnetic Emissions - Manufacturer’s declaration
MOWOOT II is intended for use in the electromagnetic environment specified below. The customer or the user of the MOWOOT II should assure
that it is used in such an environment.
Emissions Test
Compliance
Electromagnetic environment - guidance
RF Emissions CISPR 11
Group 1
MOWOOT II uses RF energy only for its internal function.
Therefore, its RF emissions are very low and are not likely to
cause any interference in nearby electronic equipment.
RF Emissions CISPR 11
Class B
MOWOOT II is suitable for use in all establishments, including
domestic establishments and those directly connected to the
public low voltage power supply network that supplies
buildings used for domestic purposes.
Harmonic Emissions IEC 61000-3-2
Complies
Voltage fluctuations, flicker emissions
IEC 61000-3-3
Complies
MOWOOT II - Electromagnetic Immunity - Manufacturer’s declaration
MOWOOT II is intended for use in the electromagnetic environment specified below. The customer or the user of the MOWOOT II should
assure that it is used in such an environment.
MOWOOT II is intended for use in the electromagnetic environment specified below. The customer or the user of the MOWOOT II should
assure that it is used in such an environment.
Immunity Test
IEC 60601 test level
Compliance
level
Electromagnetic
environment
-
guidance
Electrostatic discharge
(ESD) IEC 61000-4-2
+/- 6 kV contact
+/- 8 kV air
Complies
Electrical fast
transient/burst
IEC 61000-4-4
+/- 2 kV for power supply lines
Complies
Mains power quality should be that
of a typical domestic or hospital
environment.
Surge
IEC 61000-4-5
+/- 1 kV line to line
Complies
Mains power quality should be that
of a typical domestic or hospital
environment.
Voltage
dips,
short
interruptions and voltage
variations on power supply
input lines
IEC 61000-4-11
>95% dip in Ut for 0.5 cycle
60% dip in Ut for 5 cycles
30% dip in Ut for 25 cycles
>95% dip in Ut for 5 cycles
Complies
Mains power quality should be that
of a typical domestic or hospital
environment.
Power frequency (50/60 Hz)
magnetic field
IEC 61000-4-8
3 A/m
Complies
Power frequency magnetic fields
should be at levels characteristic of a
typical location in a typical domestic
I or hospital environment.
NOTE: Ut is the a.c. mains voltage prior to application of the test level.
