LSS−100P Installation & Operation Manual
v160817
9
Figure 4 - LSS-100P Home Page
4.
Click on the “config” to go to the Configuration Page. The username is “admin” and the
password is “ultra”. There are several configuration pages that are described below.
Figure 5 - LSS-100P Web Display Configuration Page.
5.
The first configuration page, shown above, allows you to determine how the home page will
appear. The Light Table section determines how the left side of the home page will appear (the
side that is showing luminance, color, etc.). The home page can show up to 7 rows of light
information. The source of that information is set by the first column of the light table. You can
select U.S. or metric units for temperature and luminance. LSS-100P units with board revision F
or higher also measure the relative IR illumination of the screen. This is useful for detecting
issues with IR audio and captioning systems. Select the data source for each line of the home
page light display.
