Usl LSS-100P, Инструкция по установке и эксплуатации

Страница: 13 / 37

LSS−100P Installation & Operation Manual
v160817 13
17. An NTP server is required for the LSS-100P logging. Most digital cinema servers have an NTP
server in them, so the IP address of that server can be entered. If outgoing internet access is
available, the default setting of pool.ntp.org can be used. The NTP server IP address can be
entered as a dotted decimal IP address. If a DNS server was set up on the Web Configuration
screen, a domain name (such as pool.ntp.org) can be used instead.
18.
Set the time zone UTC offset. Offsets for U.S. time zones are shown in figure 11. Note that
fractions of an hour can be set (required for Venezuela, Afghanistan, India, Sri Lanka, Nepal, and
other countries). Note that this is the offset for standard time, not advanced time, summer time,
or daylight saving time. Additional time zone information is available at
http://www.timeanddate.com/library/abbreviations/timezones/ and
http://en.wikipedia.org/wiki/List_of_time_zones_by_UTC_offset .
US Time Zone UTC Offset Standard Time Abbreviation Daylight Saving Time Abbreviation
Hawaii-Aleutian -10.0 HAST HADT
Alaska -9.0 AKST AKDT
Pacific -8.0 PST PDT
Mountain -7.0 MST MDT
Central -6.0 CST CDT
Eastern -5.0 EST EDT
Figure 9 - U.S. Time Zone Offsets
19. Enter the abbreviations for standard and advanced, summer, or daylight saving time. Select
whether daylight saving (or similar) is observed at the location the LSS-100P is installed. This
setting is not whether DST is currently being observed, but whether it is ever observed. For
example, in the U.S., this would be set to “no” for Arizona and “yes” for California. The LSS-100P
displayed logs will take this into consideration when displaying the time at the LSS-100P.
20. Note that the bottom line of this page shows the last time the LSS-100P clock was updated from
the NTP server. Since the LSS-100P does not have access to an NTP server when it is only
connected to your laptop, this will indicate that the last update was never.
21. Click the License Keys link at the top of the page. License keys are required to enable certain
advanced features in the LSS-100P. Contact USL to obtain a key for a particular LSS-100P (the
serial number of the LSS-100P will be required to issue the key. When a valid key is entered, the
key turns green. An invalid key shows up in red. At this time, the only license key available
enables control of the Dolby CP850 (enabling and disabling a test mode).
Figure 10 - License Key Configuration Page.