LSS−100P Installation & Operation Manual
v160817
22
Ethernet Device Discoverer Android version
An Android version of Ethernet Device Discoverer is available at
https://play.google.com/store/apps/details?id=com.usl.discoverer&hl=en
.
Figure 18 - Ethernet Device Discoverer for Android
Ethernet Device TCP Based Operations
The LSS-100P uses TCP port 10001. It can accept 5 simultaneous TCP connections. Commands are lower
case and terminated with a carriage return (0x0d). Parameters, if any, are separated by tab characters
(0x09) or a pipe character (|). Responses are in ASCII and terminated with a carriage return. If multiple
values are returned, they are separated with tab characters. In some cases, there may be a tab character
after the last response and before the carriage return. The command is not echoed by the LSS-100P.
LSS-100P commands can be tested using Tera Term, RealTerm (both listed below), or telnet on
operating systems that include it (Windows XP, Linux, Mac OS). Since the LSS-100P does not echo
commands or append line feed characters, Tera Term and similar programs should be set for local echo
and CR+LF on receiving a carriage return. These options are in the Setup – Terminal menu on Tera Term.
The LSS-100P commands and typical responses are shown in Figure 17. Note that many of these
commands are commonly used in scripts (described previously), and the lss100.sys.script_run command
can be used to start script execution.
Command
Response
Description
lss100.sys.auditorium
1
Returns the auditorium number
entered on the configuration
page.
lss100.sys.cct
6255.250284
Returns the correlated color
temperature.
lss100.sys.cdm2
405.151492
Returns the luminance in
candelas per square meter
