6
Set the Drive Switch to the “OFF” position before walking away or leaving the
laminator unattended. Use common sense; be cautious when operating your
laminator. Do not operate the laminator when you are tired or your reactions
are impaired in any way. Do not allow anyone to operate the laminator who has
not received proper instruction and has not read the safety precautions. Keep
children away.
Do not use the laminator for other than its intended purpose.
Watch out for cutter blade at rear of laminator; blade is extremely sharp.
Electrical Safeguards...
Never override or attempt to defeat electrical or mechanical safety interlock
devices.
The laminator has been manufactured with a plug on the machine designed to
operate on a 115volt, 20 Ampere circuit.
Disconnect the power supply before servicing your laminator. If you service the
laminator yourself, call USI Technical Assistance (800-752-9131) for additional safety
recommendations. Use only USI parts for service or replacement. Failure to use USI
parts could void manufacturer’s warranty. Note: Always turn the laminator “OFF”
and unplug it from the power outlet before attempting any service.
The laminator should only be operated from the type of power source indicated in
this OWNERS MANUAL and on the serial label located on the rear panel of the unit.
Do not leave the laminator power “ON” for extended periods while not in use.
Unplug the machine at the end of the day as a precaution against a possible fire
hazard.
Do not operate the laminator with a damaged power supply cord or plug. Do not
use an extension cord. Do not abuse the power supply cord; never pull cord to
disconnect it from a power supply. Do not allow cord to contact heat, oil or sharp
edges. Do not cut off or otherwise bypass the grounding prong on the plug.
Replace fuses only with same type fuses. Contact USI for replacement fuses.
