USFilter STRANTROL SYSTEM 5, Инструкция по установке и программированию

Страница: 31 / 36

Part III – Programming the System5
Page 27
5: Data Logging
If you choose Data Logging from the Main
Menu, the screen will display some or all of the
following choices (depending upon your system
needs). Next to each choice is the current programmed
value for that option. Type in the number of the
option you would like to program. The screen
will display the previous value selected and
prompt you to enter the new value. Type the
new value and Press Enter.
5a: Entering New Values for Data Logging
For each option you select from the Data Logging Menu the screen will display the previous value selected
for that option and prompt you to enter the new value. Data Logging is generally done on a low
frequency basis to check overall performance, but you may select it to be done on a high frequency basis
to assist you in troubleshooting a problem. Of course, the more often you choose to have sample data
logged, the more often you will need to download that data. If you sample at a rate of every 2 hours you
can store about 30 days before downloading the information, but if you sample every 5 minutes, you’ll
need to download in about 12 hours.
6: Rep Start Up
If you choose Rep Start Up from the Main
Menu, the screen will display some or all of the
following choices (depending upon your system
needs).
Next to each choice is the current programmed
value for that option. Type in the number of the
option you would like to program. The screen
will display the previous value selected and
prompt you to enter the new value. Type the new
value and Press Enter.