USFilter STRANTROL SYSTEM 5, Инструкция по установке и программированию

Страница: 24 / 36

Part III – Programming the System5
Page 20
12: Relay Modes
If you choose Relay Modes from the Main Menu,
the Screen will display some or all of the
following choices (depending upon your system
needs). The choices displayed are based on what
your representative selected for relays during Rep
Start Up. Next to each choice is the current programmed
value for that option. Type in the number of the
option you would like to program and then Press
Enter. The screen will display the previous value
selected and prompt you to enter the new value.
Type the new value and Press Enter.
12a: Entering New Values for Relay Modes
For each option you select from the Relay Modes Menu the screen will display the previous value selected
for that option and prompt you to enter the new value. The following table will help you decide what
values to enter.