Use Tech FlowTimer+ Set XL, Руководство по эксплуатации

Страница: 29 / 41

Operation and Function
03/19 Fl Set XL 27
The status indicator will now flash green/red together with the
sensitivity level.

Press the Set / Reset button (8) repeatedly until the desired
sensitivity is shown on the display (10).

Then wait until the display (10) stops flashing.

The new sensitivity is now saved.
The sensitivity level 20 is the highest sensitivity and level 120
corresponds to the lowest sensitivity (the system tolerates a
higher water flow...).
The sensitivity can only be adjusted as long as the status
indicator also flashes green/red!
Immediately after the sensitivity has been set, the possible
change of the flow duration (see also chapter 8.1.6) is
displayed, but with a green status display.