USCutter LaserPoint 2, Руководство по эксплуатации

Страница: 4 / 20

Operation Manual
- １ -
Chap 1 Attention

Ensure the supply voltage varying within the range of
±
10%, otherwise a
voltage stabilizer must be used.

Please don’t place any small iron-magnetic subject near the carriage.

Prevent from dropping foreign matters into cracks such as pins, little screws,
etc.

Please pull down the power plug if not using during a long time.

Don’t pull the cable with power when it is connected to the computer.

Don’t press the pinch roller on the grit roller, if it is not used.

Always connect the power cord to a grounded outlet.

Don’t push the carriage.

Don’t contact the carriage or the roller when the machine is working.
.