USCutter LaserPoint 2, Руководство по эксплуатации

Страница: 16 / 20

Operation Manual
- １３ -
Chap 8 Lift up / adhere
When cutting over…
1. Cut off the paper with scissors or a knife.
2. Get rid of the useless part with tweezers (you can easily do this if you add a
side frame around the pattern when cutting).
3. Adhere a special “over-pasted film” on the cut pattern and stroke it with a
scraper.
4. Lift up the “over-pasted film” and paste it on the any place you want,‘ then
tear the film off.