www.USconverters.com
USconverters.com
Copyright ©
USconverters.com | Arizona | USA
36
7.
Click OK and click Setup > Serial Port and set the baud rate to 19200 baud:
8.
Click OK. If there is a Flow switch on your Serial Bluetooth adapter it should be in
position DCE (towards the DB9 connector on the UCBT232B/EXA). You are now
ready to send commands to the UCBT232B/EXA. If you enter the command AT you
should get an ‘OK’ back from the UCBT232B/EXA.
Example: Entering the command VERSION=? gives you the UCBT232B/EXA’s
version number.