Page 26
PORTABLE LPV TREATER
TREATER SET UP
STEP 5:
Use the left control lever to raise the
outlet conveyor until it is out of the cradle.
After the outlet conveyor has been moved into a working position,
you may turn off the hydraulic motor. It is only necessary for it to
be running when moving the conveyor.
NOTICE
STEP 6:
Use the right control lever to rotate the
outlet conveyor out until it reaches the dead
stop, a full 90 degrees from the trailer.
STEP 7:
Use the left control lever to raise the
outlet conveyor until it is high enough to clear
the receptacle you will be discharging the
treated seed into.
STEP 4:
Press the black start button on the hydraulic
motor power switch.
