12
Precautions
•
The electric facility where the USAG 1613 BS "Battery Station" is to be connected will comply with currently enforced regulations.
•
The USAG 1613 BS "Battery Station" will be used only by skilled and trained personnel.
•
Use personal protection equipment and apply currently enforced working rules.
•
Always apply the vehicle manufacturer's instructions. Connect the USAG 1613 BS "Battery Station" only to the 12V circuit terminals of a 12V
vehicle.
•
Only use the USAG 1613 BS "Battery Station" for the purpose it was designed for.
•
Never disassemble the USAG 1613 BS "Battery Station". All maintenance operations will be performed by USAG's after-sales service.
•
Read the instructions carefully before use.
General description of the 1613 BS
1
charge controller
31
Clamp fastening stud
2
Power command
32
Cable exit / winding hook
11
Error indicator
33
Power supply plug 220-240V 50-60HZ
12
Charge indicator
34
Cooling outlet
13
Internal battery charge
35
Power supply cable and cigarette lighter extension storage hook
14
Charge of the external "wet" battery
36
Internal battery cover
15
Charge of the "WET, VLRA, AGM GEL" external battery
37
Internal battery location
16
Internal charge level check
38
Power fuse
21
12V cigarette lighter output
39
battery fastening strap
22
12V cigarette lighter output 20A protection
23
Polarity reversion sound and visual alarm
24
Starter mode power switch
25
Position: CHARGER ON / BOOSTER OFF
26
Position: CHARGER OFF / BOOSTER ON
Start-up
Before using your USAG 1613 BS, install the internal battery. Use only a 12V "LEAD ACID" automotive starting battery matching the following specifi-
cations:
•
The battery must be of the type: AGM, VLRA or GEL.
•
Do not use non sealed batteries allowing to top up electrolytic liquid.
•
Better performance is obtained with AGM batteries for "Start and Stop" vehicles.
•
Maximum capacity 85 Ah.
•
Maximum weight 24 KG.
EN