3
Before Starting:
1) Check
the packaging crate to locate all Parts and Hardware as listed on page 4. We take pride in mak-
ing sure you have the parts necessary to assemble the bed, however in the rare event you are missing a
piece please notify USA Murphy Beds within 7 business days after receipt of the product. Part requests
after this period of time may be subject to a shipping charge.
2) Decide exactly where the bed will be placed– Using measurements below
Disclaimer: Make sure you have measured correctly for the bed you have purchased. USA Murphy
beds are not responsible for the bed fitting in your room and laying flat if you have non level floors or
walls, or fitting around baseboards, or if you have not measured and planned for windows, air vents,
heating ducts, or other accessories etc when deciding where to place the product.
SIDE
PANEL
Baseboard outline shown
BASEBOARD –
Before Starting decide wither the cabinet and bed is to be installed in
front of the baseboard or you will cut the side panels to fit over the baseboard so that
the panels rest as flush with the wall as possible?
You will need the following Tools (Not included):
Large Blanket or flat cardboard to lay panels on and prevent scuffing or scratching
of wood finish
#2 Square screw driver
(Power screw driver not recommended for dowels or cams installa-
tion)
#2 Phillips screw driver
(Power screw driver not recommended for dowels or cams installa-
tion)
1/2“ Wrench (2 required)
3/4” Wrench
7/16” Wrench
Jig Saw if needed for Baseboard allowance on side panel
