8
Total Unit Capacity
Regen Capacity
Salt dosage
Cubic Feet of Resin
Chlorine Dosage
26,000
18,000
6 lb
0.75
.9 ounces
35,000
24,000
8 lb
1.00
1.2 ounces
53,000
36,000
12 lb
1.50
1.8 ounces
70,000
48,000
18 lb
2.00
2.4 ounces
– Filling The Brine Tank With Salt –
To expect a high level of performance and reliability, a salt manufactured specifically for water softeners must be used.
Salt of this grade is virtually free from dirt and other particulates that would eventually cause the softener to malfunction.
Any high quality water softener salt (such as solar salt) will suffice. If iron is present in the raw water, use of iron inhibiting
salt is recommended. The salt level will decrease after each regeneration cycle. Consequently, the salt compartment will
need to be check and replenished periodically.
1. Fill the brine tank with water softener salt as described above.
WARNING :
Do not fill salt above level of the brine well! About 3” below the white tube in the brine tank.
2. Replace brine tank.
3. Replace control valve cover.
– Final Check –
1. Be certain the bypass valve is in the SERVICE position.
2. Make sure the electric cord is connected to an uninterrupted 115-volt outlet.
3. Check that the time of day is set.
4. Double check regeneration schedule.
5. Make final check for leaks!
6. Leave this manual with the unit.
