22
28
3. Rinsing
WARNING:
You must perform steps 3a - 3b twice to rinse out the
fi
nal residue of
limescale and descaler.
a)
Screw the boiler drainage outlet cap back on
(tighten without forcing)
and
fi
ll the tank (O)
with clean water, then press the OK key to start
the
fi
rst cycle, which will last 9 minutes.
After 9 minutes, the machine will emit a double
beep with warning signal. When E13 shows on
the display, the boiler and the reservoir (O) pre-
viously
fi
lled must be emptied.
Screw the boiler drainage outlet cap back on
(tighten without forcing)
and
fi
ll the tank (O)
with clean water, then press the OK key to start
the second cycle, which will last 9 minutes.
After 9 minutes, the machine will emit a double
beep with warning signal. When E13 shows on
the display, the boiler and the reservoir (O) pre-
viously
fi
lled must be emptied.
b)
O
\n\nThe procedure must be
completed completely.
To start the descaling procedure
press the OK button.
ATTENTION!
Descaling procedure
BACK
OK
3. Rinsing
You must perform steps 3a-3b a minimum of 2 times to
completely rinse the boiler of limescale.
Содержание BlueEvolution S+
Страница 1: ...1 US STEAM 2440 Chambers Street Ste AVenus Texas 76084 817 297 7745 ussteam net ...
Страница 16: ...16 19 Service Maintenance Part 1 Hot water module descaling ...
Страница 19: ...19 24 Service Maintenance Part 2 Boiler descaling ...
Страница 24: ...24 30 Service Maintenance Part 3 Polyester filter optional water filter and O rings ...